Description

The Measuring Caliper is designed for taking accurate measurements where a precise reading is needed during surgical or orthopedic work. It has a 25 cm (10″) overall length and a measuring range of 0 to 50 mm, covering a useful range for smaller measurements.

The caliper has two long, tapered arms that meet at the working end. A circular handle at the opposite end provides a firm point for holding the instrument, while the small adjustment mechanism between the arms allows the measurement to be set and checked.

With a 0–50 mm measuring range, the caliper can be used for measuring the width or distance of a structure or component within its specified range. The long arms also allow measurements to be taken without placing the hand directly over the area being measured.

The simple construction makes the instrument straightforward to use. The arms can be positioned around the area being measured and adjusted until they make contact, after which the measurement can be read from the calibrated scale.

Manufactured from premium surgical-grade stainless steel, the caliper is suitable for repeated professional use and sterilization. Each instrument is carefully inspected for quality, including the arms, adjustment mechanism, and overall finish, to ensure accurate movement and proper operation. Regular checks should also be made for bending, wear, or damage that could affect measurements.

With a 25 cm (10″) length and 0–50 mm measuring range, the Measuring Caliper provides a simple way to take controlled measurements where accuracy is important.