Description

The Depth Gauge is used to check the depth of holes and openings during surgical and orthopedic procedures. It has a measuring range of up to 50 mm, with a slim body that is easy to position at the area being measured.

A narrow measuring rod extends from the end of the instrument. It can be placed into the hole or opening until it reaches the required point, while the graduated scale on the body shows the depth.

The rod is adjusted using the small sliding mechanism around the shaft. Once positioned, the measurement can be read from the scale without needing a bulky instrument around the surgical site.

With a maximum depth of 50 mm, it can be used for checking drilled holes and other prepared openings where knowing the depth is important before the next step of a procedure.

Made from premium surgical-grade stainless steel, the gauge is suitable for repeated professional use and sterilization. Each instrument is checked for quality, including the measuring rod, sliding mechanism, scale, and overall finish. The instrument should also be inspected regularly for bending or damage that could affect the reading.

The Depth Gauge provides a simple way to measure depths of up to 50 mm during surgical and orthopedic procedures.